Bearing lubrication Bearing Clearance VIBRATION AND NOISE Maximum temperature and use cost comparison table Control table of common material properties of bearing
Bearing Material Inch-mm Conversion Table How to maintenance a bearing Structure Of Bearing Bearing Installation Inspection And Testing–The rings, balls, needles and rollers of KJ bearings can be made of refining bearing steel AISI52100, stainless steel AISI440C, AISI420, etc.
–Cages are normally punch-pressed from brass strips H62 or steel strips 08, SPCC BQB402, as well as stainless steel strips AISI304, AISI302, fiber reinforced phenolic resin, plastics or copper stock, etc;
–Shields can be made of Japanese SPCC JISG3141 or stainless steel AISI304 or AISI302.
–Seals: synthetic rubber hot pressed with phosphatizing steel (AISI304 or AISI302 may used for stainless steel bearings) skeleton.
The chemical composition of bearing steel and stainless steel are listed as follows:
Steel No. | C% | Si% | Mn% | S% | P% | Cr% |
AISI52100 | 0.95-1.05 | 0.15-0.3 | 0.25-0.45 | <0.025 | <0.025 | 1.3-1.6 |
AISI440C | 0.90-1.05 | <0.8 | <0.8 | <0.04 | <0.03 | 16-19 |
